Acrylic Modified Isocyanate Two Pack!
Ultra Hard Wearing Surface Perfect For
• High build, high solids urethane concrete coating
• Clear Solids >40%, Coloured Solids >50%
• Easy to use & DIY friendly two pack kit
• Unyielding adhesive bond to countertops
• Dramatically improves cleanability & maintenance
• Prevents powdering and degradation of concrete
• Forms durable, hard, yet flexible coating
• Exceptional gloss finish
• Good dry & through cure
• Resistant to abrasion
• Excellent mark and scuff resistance
• Excellent chemical resistance – oils, greases, alkali
• Urethane Based
• UV resistant
• Easy to recoat
• Can be applied by:
Available In Clear Or Coloured:
Click Colours To Enlarge
Colour selected at checkout
Suitable for areas exposed directly to UV light
as product is non-yellowing, 100% UV stable.
Suitable for benchtop areas requiring the ultimate in chemical/stain resistance.
|Very Good||Good||Excellent||Very Good|
Higher Temperature Resistance
Higher Stain Resistance
Higher Abrasion Resistance
! ! ! ! ! ! ! !
5-8 sqm / L per coat on porous surfaces
9-11 sqm / L per coat on less-porous surfaces
5⁰C Substrate Temperature
Surface Dry (minutes): N/A
Hard Dry (hours): N/A
Recoat Time (hours): N/A
Pot Life (minutes): N/A
10⁰C Substrate Temperature
Surface Dry (minutes): 120
Hard Dry (hours): 24
Recoat Time (hours): 12
Pot Life (minutes): 90
20⁰C Substrate Temperature
Surface Dry (minutes): 60
Hard Dry (hours): 12
Recoat Time (hours): 6
Pot Life (minutes): 60
30⁰C Substrate Temperature
Surface Dry (minutes): 30
Hard Dry (hours): 8
Recoat Time (hours): 4
Pot Life (minutes): 40
**As project conditions vary, applicators may need to adjust times accordingly.
Allow to fully cure between coats (Tack Free).
Residential to Commercial Benchtops
UN 1263, DG CLASS 3 PKG II, HAZCHEM 3 [Y]E
FIRST READ GENERAL PREPARATION GUIDE HERE
Mix 3 parts of A with 1 part of B by volume and stir thoroughly.
Apply one full coat by preferred method of application.
Leave overnight, but no longer than 3 days for recoat. If longer than 3 days sand the entire surface.
Ensure that any sanding debris is removed before applying second coat.
The benchtop will accept light traffic after 3 days. Full cure is after 7 days.
When mixing ensure that mixing equipment is clean as polyurethanes are moisture sensitive.